Stock No. TEN2300 1/2in Drive Stud Extractor For Inserting And Extracting Stud Bolts.one Eccentric Journalled, Knurled Wheel Grips Against An Internal Fluting.ranging From 5.5mm To 19mm....More Info
Stock No. TEN29280104 Stainless Steel Digital Metric/imperial Vernier Caliper.length Of Measurement : 150mm.jaw Length : 40mm.height Of Figures : 11mm.resolution : 0.01mm. specifications :reading 0.01mm.stainless Steel.repeated Reading +/- 0.01mm.zero Set In Any Position.switch Off Button.adjustable Between Mm And Inch.din 862.screwlock.4 Function....More Info
Stock No. TEN3492AGE Torque Wrench According To Din3122. With Ratchet The Torque Wrench Can Be Used For Both Tightening And Final Checking Of The Torque. Reversible With Lever, But Only For Right Hand Action For Torque Checking. Equipped With Angular Gauge For After Tightening.graduated In Nm And Ft/lbs.lockable Setting.accuracy : +/- 4%.satin Finish. Rubber Handle.3/4in Square Drive. ...More Info
Stock No. TEN3492AGE1 3/4in Square Torque Wrench With Flip Reverse Ratchet Action Suitable For Commercial And Industrial Applications From 140-700nm (100-500 Ft/lb), With In Built Angular Gauge.manufactured To Conform To Bs6703/88.features:nm Base Scales With Ft/lb Or Kg Reference Scalesquality Satin Finishrubber Protective Collarlocking Knobunique Angular Gauge, For Use After Tightening Stretch Bolts, Which Allows Bol...More Info
Stock No. TEN3800FRP Satin Finished Ratchet With Fibre Reinforcement For Improved Performance With Flip Reverse And Quick Release.3/8 Square Drive....More Info
Stock No. TEN3892AGE1 3/8in Square Drive Torque Wrench With Flip Reverse Ratchet Action, And Nm Case Scales With Ft/lb Or Kg Reference Scales. Manufactured To Conform To Bs 6703/88.covers 5-25nm (4-18ft/lb) With In Built Angular Gauge, Also Suitable For 1/4in Square Drive Sockets If Used In Conjunction With 3/8 Female/ 1/4 Male Adaptor (380035).the Unique Angular Gauge, For Use After Tightening Stretch Bolts, Allows Bo...More Info
Stock No. TEN3892AGE3 3/8in Square Drive Torque Wrench With Flip Reverse Ratchet Action, And Nm Case Scales With Ft/lb Or Kg Reference Scales. Manufactured To Conform To Bs 6703/88.the Unique Angular Gauge, For Use After Tightening Stretch Bolts, Allows Bolts To Be Tightened Over And Above A Pre-set Torque Rating By So Many Degrees, E.g. 45βΊ Both The Torque And Angular Gauge Can Be Set With The One Tool.supplied In Ro...More Info
Stock No. TEN580 Stainless Steel Tray With Plastic Enclosed Magnet Which Does Not Damage The Car Paintwork.for Screws, Nuts And Washers Etc..can Be Secured On Its Side As Well As Upside Down.ideal For Working Under Cars Etc.....More Info
Stock No. TEN582MI Three In One Telescopic Inspection Tool With Maximum Extension Of 57mm.combines A Very Strong Magnet With A Fully Adjustable Polished Mirror, An Etching Scribe And An All In One Tool With Pocket Clip....More Info
Accessories
