Stock No. NICM2RE8 This Millsaw File Is Of Rectangular Section And Used Primarily For Sharpening Mill Or Circular Saws.single Cut Teeth On Both Sides And Edges.has Two Round Edges.overall Size (excluding Tang) Is Approx 204 X 20 X 4mm.8in.second Cut.tanged...More Info
Stock No. NICC18 Single Cut Teeth For Sharpening Round-hooded Chain Saw Teeth.safe Point And Efficient Tooth Design.length. 6in.diameter. 1/8in....More Info
Stock No. NIC80975 Pro 4-in-1 Series Hacksaw Framestandard 90 Degree For General Use 45 Degree Angle For Flush Cuts Low Profile Position For Tight Spaces Jab Saw Configuration For A Variety Of Inside Cuts High Tension For Tightening The Blade Up To 30,000 Psi Cushion Grip Handle For Better Control And Comfort Magnetic Blade Storage Inside Frame ...More Info
Stock No. NICC14 Single Cut Teeth For Sharpening Round-hooded Chain Saw Teeth.safe Point And Efficient Tooth Design.length. 8in.diameter. 1/4in....More Info
Stock No. NICDE6 For Sharpening Saws With 60βΊ Angle.no Tang But Tapered At Each End And Supplied With Wooden Handle.single Cut Teeth.length 6in.side 13/64in....More Info
Stock No. NICDE7 For Sharpening Saws With 60βΊ Angle.no Tang But Tapered At Each End And Supplied With Wooden Handle.single Cut Teeth.length. 7in.side. 7/32in....More Info
Stock No. NICDE8 For Sharpening Saws With 60βΊ Angle.no Tang But Tapered At Each End And Supplied With Plastic Handle.single Cut Teeth.length 8in.side 9/32in...More Info
Stock No. NICTES4 A Single Ended Triangular Saw File, Single Cut. For Dovetail And Other Fine Toothed Sawsapproximate Size. (excluding Tang) 100 X 4.5mm.size: 4in X 3.1/6intanged...More Info
Stock No. NICTES6 A Single Ended Triangular Saw File, Single Cut. For Dovetail And Other Fine Toothed Saws.approximate Size. (excluding Tang) 150 X 6.5mm.size: 6in X 9/32intanged...More Info
Stock No. NICFO10 A General Purpose File Suited To Agricultural Use.it Is Self Handled, Flat With Parallel Sides.teeth Are Single Cut And The File Has Two Safe Edges.there Is A Hang Up Hole In The Handle.length. (excluding Handle) 250mm. (10in)...More Info
Stock No. NICFO8 A General Purpose File Suited To Agricultural Use.it Is Self Handled, Flat With Parallel Sides.teeth Are Single Cut And The File Has Two Safe Edges.there Is A Hang Up Hole In The Handle.length. (excluding Handle) 200mm. (8in)....More Info
Stock No. NICFB6 For General Work On Iron And Steel Slightly Tapered In Width And Thickness.double Cut On Both Sides, And Single Cut On Both Edges.size.6in.type. Bastard Cut Flattanged....More Info
Stock No. NICFB8 For General Work On Iron And Steel Slightly Tapered In Width And Thickness.double Cut On Both Sides, And Single Cut On Both Edges.size.8in.type. Bastard Cut Flattanged....More Info
Stock No. NICFB10 For General Work On Iron And Steel Slightly Tapered In Width And Thickness.double Cut On Both Sides, And Single Cut On Both Edges.size.10in.type. Bastard Cut, Flattanged...More Info
Stock No. NICFB12 For General Work On Iron And Steel Slightly Tapered In Width And Thickness.double Cut On Both Sides, And Single Cut On Both Edges.size.12in.type. Bastard, Cut, Flattanged....More Info
Stock No. NICFSC6 For General Work On Iron And Steel Slightly Tapered In Width And Thickness.double Cut On Both Sides, And Single Cut On Both Edges.size.6in.type. Second Cut Flattanged...More Info
Stock No. NICFSC8 For General Work On Iron And Steel Slightly Tapered In Width And Thickness.double Cut On Both Sides, And Single Cut On Both Edges.size.8in.type. Second Cut Flattanged...More Info
Stock No. NICFSC10 For General Work On Iron And Steel Slightly Tapered In Width And Thickness.double Cut On Both Sides, And Single Cut On Both Edges.size.10in.type. Second Cut Flattanged....More Info
Stock No. NICFSC12 For General Work On Iron And Steel Slightly Tapered In Width And Thickness.double Cut On Both Sides, And Single Cut On Both Edges.size.12in.type. Second Cut Flattanged....More Info
Stock No. NICFSC14 For General Work On Iron And Steel Slightly Tapered In Width And Thickness.double Cut On Both Sides, And Single Cut On Both Edges.size.14in.type. Second Cut Flattanged....More Info
Stock No. NICFSM6 For General Work On Iron And Steel.slightly Tapered In Width And Thickness.double Cut On Both Sides, And Single Cut On Both Edges.size. 6in.type. Smooth Cut Flattanged....More Info
Stock No. NICFSM8 For General Work On Iron And Steel.slightly Tapered In Width And Thickness.double Cut On Both Sides, And Single Cut On Both Edges.size.8in.type. Smooth Cut Flattanged....More Info
Stock No. NICFSM10 For General Work On Iron And Steel.slightly Tapered In Width And Thickness.double Cut On Both Sides, And Single Cut On Both Edges.size.10in.type. Smooth Cut Flattanged....More Info
Stock No. NICFSM12 For General Work On Iron And Steel Slightly Tapered In Width And Thickness.double Cut On Both Sides, And Single Cut On Both Edges.size.12in.type. Smooth Cut Flattanged....More Info
Stock No. NICCR10 Used By Cabinet Makers And Woodworkers.single Cut On Edges.half Round With Curved Side Having A Larger Radius Than Wood Rasp.length. 10in. Half Round Regular Cut Tanged...More Info
Accessories
