Stock No. MAR170 The Push Pin Is Designed To Drive Panel Pins Into Hardboard And Plywood Without Bending Them.the Pin Is Held In The Brass Barrel By A Magnetic Plunger And Once The Pin Has Been Driven Into The Hardboard Or Plywood, The Spring Action Leaves The Tool Ready For Reloading....More Info
Stock No. MAR1838C12 This Bradawl Has A Square Section Blade Which Is Tapered To A Fine Point To Allow Quicker Penetration Without Splitting The Wood.the Handle Is Made From Beech Wood And Fitted To The Blade With A Brass Ferrule.size. 1.3/8intip Size: 1/8incarton Of 12....More Info
Stock No. MAR1838W This Bradawl Has A Square Section Blade Which Is Tapered To A Fine Point To Allow Quicker Penetration Without Splitting The Wood.the Handle Is Made From Beech Wood And Fitted To The Blade With A Brass Ferrule.size. 1.3/8inpointed....More Info
Stock No. MAR2083 This Cutting Gauge Has A Rosewood Body And Stock With A Sealed Finish.the Thumbscrew Is Brass And The Steel Blade Is Held In Place By A Brass Wedge.the Blade Can Be Used For Marking Or Cutting Strips Of Wood Veneer And Small Rebates....More Info
Stock No. MAR2153 This Combination Mortice And Marking Gauge Is Made Of Sealed Rosewood And Has A Brass Pull Slide To Adjust The Extra Spur For Use As A Mortice Gauge.a Knurled Brass Thumbscrew Is Used To Secure The Stock....More Info
Stock No. MAR2154 This Combination Mortice Marking Gauge Is Made Of Sealed Rosewood Incorporating Brass Facing Strips.knurled Brass Stock Fixing Screw And Hardened Steel Spur To Allow The Gauge To Be Used For Ordinary Marking....More Info
Stock No. MAR22006 This Try Square Has A Sealed Hardwood Stock Faced With Brass For Extra Protection Against Damage And To Give Longer Life And Better Accuracy.it Has A Hardened Steel Blade Which Is Secured By Three Steel Rivets With Brass Washers, Preventing Movement.size 150mm (6in)....More Info
Stock No. MAR22009 This Try Square Has A Sealed Hardwood Stock Faced With Brass For Extra Protection Against Damage And To Give Longer Life And Better Accuracy.it Has A Hardened Steel Blade Which Is Secured By Three Steel Rivets With Brass Washers, Preventing Movement.size 225mm (9in)....More Info
Stock No. MAR220012 This Try Square Has A Sealed Hardwood Stock Faced With Brass For Extra Protection Against Damage And To Give Longer Life And Better Accuracy.it Has A Hardened Steel Blade Which Is Secured By Three Steel Rivets With Brass Washers, Preventing Movement.size 300mm (12in)....More Info
Stock No. MAR22261012 This Sliding Bevel Is Made With A Sealed Rosewood Stock.the Blade Is Joined To The Stock With A Quick Release Brass Locking Lever.the Slot In The Hardened Steel Blade Allows The User To Accommodate A Wide Range Of Different Size Work Pieces.size. 10.1/2in....More Info
Stock No. MAR22269 This Sliding Bevel Is Made With A Sealed Rosewood Stock.the Blade Is Joined To The Stock With A Quick Release Brass Locking Lever.the Slot In The Hardened Steel Blade Allows The User To Accommodate A Wide Range Of Different Size Work Pieces.size. 9in....More Info
Stock No. MAR2450 Marples Cabinet Scraper Made From High Carbon Steel, Hardened And Tempered To 470 Vickers And Polished To Give A Smooth Finish.it Has A Good Edge Retention But Is Easily Re-sharpened.type. 5in Rectangle. (flat) 125mm....More Info
Stock No. MAR2451 Marples Cabinet Scraper Made From High Carbon Steel, Hardened And Tempered To 470 Vickers And Polished To Give A Smooth Finish.it Has A Good Edge Retention But Is Easily Re-sharpened.type. 6in Rectangle. (flat) 150mm....More Info
Stock No. MAR2452 Marples Cabinet Scraper Made From High Carbon Steel, Hardened And Tempered To 470 Vickers And Polished To Give A Smooth Finish.it Has A Good Edge Retention But Is Easily Re-sharpened.type. Gooseneck (flat)...More Info
Stock No. MAR2453 Marples Cabinet Scraper Made From High Carbon Steel, Hardened And Tempered To 470 Vickers And Polished To Give A Smooth Finish.it Has A Good Edge Retention But Is Easily Re-sharpened.type. Hollow. (flat)...More Info
Stock No. MAR373112 Blade, Bolster And Tang Forged From One Piece Of Steel.edges Bevelled To Enable Easier Working In Tight Corners.fitted With 2 Tone Splitproof Plastic Handle Which Will Withstand Heavy Usage.size. 1.1/2in - 38mm....More Info
Stock No. MAR373114 Blade, Bolster And Tang Forged From One Piece Of Steel.edges Bevelled To Enable Easier Working In Tight Corners.fitted With 2 Tone Splitproof Plastic Handle Which Will Withstand Heavy Usage.size. 1.1/4in - 32mm....More Info
Stock No. MAR3731 Blade, Bolster And Tang Forged From One Piece Of Steel.edges Bevelled To Enable Easier Working In Tight Corners.fitted With 2 Tone Splitproof Plastic Handle Which Will Withstand Heavy Usage.size.1in - 25mm....More Info
Stock No. MAR37312 Blade, Bolster And Tang Forged From One Piece Of Steel.edges Bevelled To Enable Easier Working In Tight Corners.fitted With 2 Tone Splitproof Plastic Handle Which Will Withstand Heavy Usage.size. 1/2in - 12mm....More Info
Stock No. MAR37314 Blade, Bolster And Tang Forged From One Piece Of Steel.edges Bevelled To Enable Easier Working In Tight Corners.fitted With 2 Tone Splitproof Plastic Handle Which Will Withstand Heavy Usage.size. 1/4in - 6mm....More Info
Stock No. MAR37318 Blade, Bolster And Tang Forged From One Piece Of Steel.edges Bevelled To Enable Easier Working In Tight Corners.fitted With 2 Tone Splitproof Plastic Handle Which Will Withstand Heavy Usage.size. 1/8in - 3mm....More Info
Stock No. MAR3732 Blade, Bolster And Tang Forged From One Piece Of Steel.edges Bevelled To Enable Easier Working In Tight Corners.fitted With 2 Tone Splitproof Plastic Handle Which Will Withstand Heavy Usage.size. 2in - 50mm....More Info
Stock No. MAR37334 Blade, Bolster And Tang Forged From One Piece Of Steel.edges Bevelled To Enable Easier Working In Tight Corners.fitted With 2 Tone Splitproof Plastic Handle Which Will Withstand Heavy Usage.size. 3/4in - 18mm....More Info
Stock No. MAR37338 Blade, Bolster And Tang Forged From One Piece Of Steel.edges Bevelled To Enable Easier Working In Tight Corners.fitted With 2 Tone Splitproof Plastic Handle Which Will Withstand Heavy Usage.size. 3/8in - 10mm....More Info
Stock No. MAR37358 Blade, Bolster And Tang Forged From One Piece Of Steel.edges Bevelled To Enable Easier Working In Tight Corners.fitted With 2 Tone Splitproof Plastic Handle Which Will Withstand Heavy Usage.size. 5/8in - 16mm....More Info
Stock No. MAR373S4 Blade, Bolster And Tang Forged From One Piece Of Steel.edges Bevelled To Enable Easier Working In Tight Corners.fitted With 2 Tone Splitproof Plastic Handle Which Will Withstand Heavy Usage.the Set Of 4 Contains 1 Each Of :-1/4in, 1/2in, 3/4in, And 1.in. ( 6, 12, 18, 25mm)....More Info
Accessories
