Stock No. 31/10LX1/4TC Cuts Groove For Trend Routaseal.
Position Seal Into Apex Of Jamb And Stop.
More Economic To Use Than More Complex Seals.
Use With A Small 1/4 Inch Shank Hand Router.
Use Stc For Abrasive Material.
Dimensions:
D=5 Mm
C=3 Mm
Ol=61 Mm
A=115 Degrees
Shank Diameter=1/4 Inch
Shank Diameter: 1/4
Grade: Tct
Diameter Metric: 5
Cut Length Metric: 3
Overall Length Metric: 61
...More Info
Stock No. 330X1/2TC Trend Aquamac 63 Recessing Sets Ref.330 And 331 Are Designed To Accomodate The Popular Schlegel Aquamac 63 Weather Strip System And Allows For A Particuraly Small Gap Between The Sash And Frame. The Slot Can Be Positioned Part Way Down The Side Of The Rebate, Or At The Bottom Of The Rebate.
Ref. 330 Has No Guide Bearing.
Ref. 331 Comes Complete With A Guide-bearing To Reduce Setting-up Time.
...More Info
Stock No. 331X1/2TC Trend Aquamac 63 Recessing Sets Ref.330 And 331 Are Designed To Accomodate The Popular Schlegel Aquamac 63 Weather Strip System And Allows For A Particuraly Small Gap Between The Sash And Frame. The Slot Can Be Positioned Part Way Down The Side Of The Rebate, Or At The Bottom Of The Rebate.
Ref. 330 Has No Bearing Guide.
Ref. 331 Comes Complete With A Guide-bearing To Reduce Setting-up Time.
...More Info
Stock No. 332X1/2TC Refs. 332 And 332 Are Designed To Accomodate Schlegel Smokeseal And Quick Fit Brush Strips. The Groove Is Cut In The Door Edge Rather Than The Frame.
Ref. 332 Has No Bearing Guide.
Ref. 333 Comes Complete With A Guide Bearing To Reduce Setting-up Time.
Mec Mechanical Feed Only.
Dimensions:
D=45 Mm
D2=34 Mm
C=2.75 Mm
C2=2.5 Mm
Ol=58 Mm
Shank Diameter=1/2 Inch
Shank Diameter: 1/2
...More Info
Stock No. 333X1/2TC Refs. 332 And 332 Are Designed To Accomodate Schlegel Smokeseal And Quick Fit Brush Strips. The Groove Is Cut In The Door Edge Rather Than The Frame.
Ref. 332 Has No Bearing Guide.
Ref. 333 Comes Complete With A Guide Bearing To Reduce Setting-up Time.
Mec Mechanical Feed Only.
Dimensions:
D=45 Mm
D2=34 Mm
C=2.75 Mm
C2=2.5 Mm
Ol=58 Mm
B=28 Mm
Shank Diameter=1/2 Inch
Shank Diameter...More Info
Stock No. 334X1/2TC Recessing Cutter Will Accommodate The Schlegel Aquamac 21 Seal. The Cutter Is Designed For Use With The Aquamac Seal In A Wiping Mode And Comes Complete With A Guide Bearing To Reduce Setting-up Time And Simplify Machining Operations.
Mec Mechanical Feed Only.
Dimensions:
D=46.3 Mm
D2=34.3 Mm
C=10.3 Mm
C2=2.7 Mm
Ol=90 Mm
B=28.6 Mm
Shank Diameter=1/2 Inch
Shank Diameter: 1/2
...More Info
Stock No. 8D/4X1/4TC A Variety Of Alloy Bearing Rings To Give Various Rebate Sizes.
Rings Are Secured Between The Two Bearings On The Large Rebater Ref. 46/390.
Dimensions:
D=13 Mm
C=12 Mm
Ol=55 Mm
P=4.8 Mm
E=4 Mm
Shank Diameter=1/4 Inch
Shank Diameter: 1/4
Grade: Tct
Diameter Metric: 13
Cut Length Metric: 12
Overall Length Metric: 55
Bearing Diameter Metric: 4.8...More Info
Stock No. AQ21/B/10 Aquamac 21 Strip Is Fitted Into The Door Frame Rebate (head And Jambs) As Three Cut Pieces Forming A Compression Or Wiping Seal.
The Seal Is Butt Joined At The Corners.
To Seal The Door Bottom, Schlegel Weather Bar Is Mounted Into The Threshold Section.
It Is Important That The Seal Does Not Abut The Weather Bar But Runs To The Threshold Section In Front (weatherside) Of It, To Maximis...More Info
Stock No. AQ21/B/25 Aquamac 21 Strip Is Fitted Into The Door Frame Rebate (head And Jambs) As Three Cut Pieces Forming A Compression Or Wiping Seal.
The Seal Is Butt Joined At The Corners.
To Seal The Door Bottom, Schlegel Weather Bar Is Mounted Into The Threshold Section.
It Is Important That The Seal Does Not Abut The Weather Bar But Runs To The Threshold Section In Front (weatherside) Of It, To Maximis...More Info
Stock No. AQ21/B/250 Aquamac 21 Strip Is Fitted Into The Door Frame Rebate (head And Jambs) As Three Cut Pieces Forming A Compression Or Wiping Seal.
The Seal Is Butt Joined At The Corners.
To Seal The Door Bottom, Schlegel Weather Bar Is Mounted Into The Threshold Section.
It Is Important That The Seal Does Not Abut The Weather Bar But Runs To The Threshold Section In Front (weatherside) Of It, To Maximis...More Info
Stock No. AQ21/W/10 Aquamac 21 Strip Is Fitted Into The Door Frame Rebate (head And Jambs) As Three Cut Pieces Forming A Compression Or Wiping Seal.
The Seal Is Butt Joined At The Corners.
To Seal The Door Bottom, Schlegel Weather Bar Is Mounted Into The Threshold Section.
It Is Important That The Seal Does Not Abut The Weather Bar But Runs To The Threshold Section In Front (weatherside) Of It, To Maximis...More Info
Stock No. AQ21/W/25 Aquamac 21 Strip Is Fitted Into The Door Frame Rebate (head And Jambs) As Three Cut Pieces Forming A Compression Or Wiping Seal.
The Seal Is Butt Joined At The Corners.
To Seal The Door Bottom, Schlegel Weather Bar Is Mounted Into The Threshold Section.
It Is Important That The Seal Does Not Abut The Weather Bar But Runs To The Threshold Section In Front (weatherside) Of It, To Maximis...More Info
Stock No. AQ21/W/250 Aquamac 21 Strip Is Fitted Into The Door Frame Rebate (head And Jambs) As Three Cut Pieces Forming A Compression Or Wiping Seal.
The Seal Is Butt Joined At The Corners.
To Seal The Door Bottom, Schlegel Weather Bar Is Mounted Into The Threshold Section.
It Is Important That The Seal Does Not Abut The Weather Bar But Runs To The Threshold Section In Front (weatherside) Of It, To Maximis...More Info
Stock No. AQ63/B/10 Aquamac 63 Strip Is Fitted Into The Window Frame Aperture Using Four Cut Lengths.
It Is Important To Create Tight Butt Or Notched Joints To Ensure High Levels Of Window Performance.
Joints Can Be Enhanced By The Application Of A Small Amount Of Silicone Mastic.
When Fitted, It Is Necessary To Notch The Seal End.
Dimensions:
Colour=brown
Length=10m...More Info
Stock No. AQ63/B/25 Aquamac 63 Strip Is Fitted Into The Window Frame Aperture Using Four Cut Lengths.
It Is Important To Create Tight Butt Or Notched Joints To Ensure High Levels Of Window Performance.
Joints Can Be Enhanced By The Application Of A Small Amount Of Silicone Mastic.
When Fitted, It Is Necessary To Notch The Seal End.
Dimensions:
Colour=brown
Length=25m...More Info
Stock No. AQ63/B/300 Aquamac 63 Strip Is Fitted Into The Window Frame Aperture Using Four Cut Lengths.
It Is Important To Create Tight Butt Or Notched Joints To Ensure High Levels Of Window Performance.
Joints Can Be Enhanced By The Application Of A Small Amount Of Silicone Mastic.
When Fitted, It Is Necessary To Notch The Seal End.
Dimensions:
Colour=brown
Length=300m...More Info
Stock No. AQ63/W/10 Aquamac 63 Strip Is Fitted Into The Window Frame Aperture Using Four Cut Lengths.
It Is Important To Create Tight Butt Or Notched Joints To Ensure High Levels Of Window Performance.
Joints Can Be Enhanced By The Application Of A Small Amount Of Silicone Mastic.
When Fitted, It Is Necessary To Notch The Seal End.
Dimensions:
Colour=white
Length=10m...More Info
Stock No. AQ63/W/25 Aquamac 63 Strip Is Fitted Into The Window Frame Aperture Using Four Cut Lengths.
It Is Important To Create Tight Butt Or Notched Joints To Ensure High Levels Of Window Performance.
Joints Can Be Enhanced By The Application Of A Small Amount Of Silicone Mastic.
When Fitted, It Is Necessary To Notch The Seal End.
Dimensions:
Colour=white
Length=25m...More Info
Stock No. AQ63/W/300 Aquamac 63 Strip Is Fitted Into The Window Frame Aperture Using Four Cut Lengths.
It Is Important To Create Tight Butt Or Notched Joints To Ensure High Levels Of Window Performance.
Joints Can Be Enhanced By The Application Of A Small Amount Of Silicone Mastic.
When Fitted, It Is Necessary To Notch The Seal End.
Dimensions:
Colour=white
Length=300m...More Info
Stock No. C206X1/2TC Recessing Cutter Will Accommodate The Schlegel Aquamac 63 Weather Strip System And Allows For A Particularly Small Gap Between Sash And Frame. The Slot Can Be Positioned Part Way Down The Side Of The Rebate, Or At The Bottom Of The Rebate.
Dimensions:
D=41.3 Mm
D2=28.3 Mm
C=4.8mm
C2=2.7 Mm
Ol=67 Mm
B=22 Mm
Shank Diameter=1/2 Inch
Shank Diameter: 1/2
Grade: Tct
Diameter Me...More Info
Stock No. C207X1/2TC Recessing Cutter Will Accommodate The Schlegel Aquamac 21 Seal. This Cutter Is Designed For Use With The Aquamac Seal In A Wiping Mode And Comes Complete With A Guide Bearing To Reduce Setting-up Time And Simplify Machining Operations.
Dimensions:
D=46.3 Mm
D2=34.3 Mm
C=10.3mm
C2=2.7 Mm
B=28.6 Mm
Ol=90 Mm
Shank Diameter=1/2 Inch
Shank Diameter: 1/2
Grade: Tct
Diameter Me...More Info
Accessories
